Metro Route from Shakurpur Metro Station to Pulbangash Metro Station – Fare & Travel Time
8 km22 min
5:00 AM – 11:30 PMHelpline 155370
Search Delhi Metro Routes
Route Overview
Delhi Metro connects Shakurpur and Pulbangash with 2 route options, covering approximately 8 km. A token fare is ₹32, while smart card users pay ₹29. Trains run from 7:47 AM to 12:27 AM, about every 7–8 minutes.
Via Netaji Subhash Place: 1 Interchange · 22 Minutes · ₹32
Via Dilli Haat INA and Kashmere Gate: 2 Interchanges · 1 Hour 12 Minutes · ₹54
Available Routes(2)
Swipe to compare
Netaji Subhash Place
Change line
Pink Circular LineRed Line
Netaji Subhash Place
Red Line
Platform 2Towards Shaheed Sthal (New Bus Adda)
Start
Shakurpur
Pink Circular Line
↺AnticlockwisePlatform 1Towards Maujpur Babarpur
9 stops in between
Sarojini Nagar
Dilli Haat INA
Change line
Pink Circular LineYellow Line
Dilli Haat INA
Yellow Line
Platform 2Towards Samaypur Badli
Metro Route Visual Map
See every station between Shakurpur and Pulbangash in order. Tap any station marker to open its details page.
Entry & Exit Gates at Both Stations
Find the correct entry and exit gates for your journey.
Start Station
Shakurpur
2 Gates Available
Gate 1
Towards Indira Gandhi Polyclinic, Wazirpur, Prachin Shiv Mandir, Gurudwara Guru Singh Sabha
Gate 2
Towards Jj Colony Shakurpur, Shakurpur Village, Shakurpur Crossing & Brittania Chowk
Destination Station
Pulbangash
1 Gate Available
Gate 1
Towards Roshanara Road
Metro Route Map
This map shows every line, station, and interchange point on Delhi Metro. View it online or download it for offline use.
Route Summary
↻Clockwise Direction
2 routes are available from Shakurpur to Pulbangash on Delhi Metro:
Via Netaji Subhash Place₹32
1 Interchange22 Minutes₹29
via Pink Circular Line and Red Line
Via Dilli Haat INA and Kashmere Gate₹54
2 Interchanges1 Hour 12 Minutes₹49
via Pink Circular Line and Yellow Line and Red Line
Trains run daily from 7:47 AM to 12:27 AM, every 7–8 minutes.
How to Travel from Shakurpur Metro Station to Pulbangash Metro Station – Via Netaji Subhash Place Route
Steps below describe the Via Netaji Subhash Place route (1 interchange, 22 Minutes). For other options, see the Route Overview tabs above.
- Reach Shakurpur
- Shakurpur is a elevated station on the Pink Circular Line.
- Token Fare: ₹32
- Smart Card Fare: ₹29
- Proceed to Platform 2
- After security check, follow signs for "Pink Circular Line – Yamuna Vihar".
- The platform is accessible via elevated level.
- Train direction: ↻Clockwise
- Board the Train
- Trains run every 7–8 minutes.
- Interchange:
- Change trains at Netaji Subhash Place: get off the Pink Circular Line and board the Red Line.
- Journey Details:
- Travel Time: 22 minutes
- Intermediate Stops: 6
- Direction: Yamuna Vihar
- Stations in order:
Shakurpur, Netaji Subhash Place, Keshav Puram, Kanhaiya Nagar, Inderlok, Shastri Nagar, Pratap Nagar, Pulbangash
- Arrive at Pulbangash
- You arrive at Pulbangash after about 22 minutes.
- Exit Gates: Pulbangash has 1 gate:
Gate 1: Roshanara Road
Return Journey
To return to Shakurpur, take the reverse route from Pulbangash. Travel time and fare remain the same (₹32).
Help Us Improve This Page
Is the information below correct or incorrect? Your feedback helps us keep MetroYatra accurate for everyone.
Shakurpur to Pulbangash Route – Frequently Asked Questions
Common questions about the Shakurpur to Pulbangash metro route: travel time, fare, station sequence, and interchanges.
The Delhi Metro metro journey from Shakurpur to Pulbangash takes approximately 22 Minutes, covering 8 km. The route covers 8 stations in total.
Travelling from Shakurpur to Pulbangash on Delhi Metro involves 2 lines: Pink Circular Line and Red Line. You need to change from Pink Circular Line to Red Line at Netaji Subhash Place.
No, Shakurpur to Pulbangash requires 1 interchange. Board the Pink Circular Line from Shakurpur, then change to the Red Line at Netaji Subhash Place to reach Pulbangash.
The metro distance between Shakurpur and Pulbangash on Delhi Metro is 8 km, covered in approximately 22 Minutes.
The Shakurpur to Pulbangash metro route on Delhi Metro covers 8 stations in total (including origin and destination), with 6 intermediate stops.
The Shakurpur to Pulbangash metro route on Delhi Metro covers 8 stations. Here they are in order:
- Shakurpur
- Netaji Subhash Place
- Keshav Puram
- Kanhaiya Nagar
- Inderlok
- Shastri Nagar
- Pratap Nagar
- Pulbangash
Yes, this route has 1 interchange. You need to change from Pink Circular Line to Red Line at Netaji Subhash Place.
The metro fare from Shakurpur to Pulbangash on Delhi Metro is ₹32 for a single-journey token and ₹29 with a Metro Smart Card.
On Delhi Metro, the first train from Shakurpur towards Pulbangash is at 7:47 AM and the last train is at 12:27 AM. Services run daily between 7:47 AM and 12:27 AM.
Trains on Delhi Metro run every 7–8 minutes between Shakurpur and Pulbangash. Services are available from 7:47 AM to 12:27 AM.
At Shakurpur, board from Platform 2 towards Yamuna Vihar on Delhi Metro.
The Delhi Metro helpline number is 155370. Contact for route information, lost property, or passenger assistance.